Electro-hydraulic synchronous bending machine has good stiffness and stability, eliminate stress; Hydraulic transmission, stable and reliable operation; Electro-hydraulic servo system, full closed-loop feedback control synchronization; Bending accuracy of anti-throat deformation system of WEK 125T3200 CNC bending machine.
Standard configuration :(4+1) shaft; Y1 and Y2 axes control the numerical axes of the cylinders on both sides; X controls the movement of rear stopper before and after; R controls the movement of the rear gauge up and down, and V compensates the cylinder.
The structural characteristics of the machine
Whole steel plate welding machine, after tempering vibration to eliminate stress, good stability; Machine sandblasting rust removal, and sprayed with anti-rust paint; The frame is clamped and formed by imported CNC three-dimensional machining center, which makes the parallelism and perpendicularity of each mounting surface. Computer system can control Y1, Y2 axis (Y1 control left cylinder, Y2 control right cylinder), slider synchronous movement, X axis control rear baffle dimensional accuracy,R axis control rear baffle up and down dimensional accuracy, V axis computer hydraulic control table compensation accuracy. (Z1, Z2) The lateral movement of the two rear stopper fingers is electrically controlled
1. Slider structure
Upper moving bending design, low noise, stable working state
◆ Double guide rail structure, slide block more stable operation
◆ Y1, Y2 can be programmed separately, can work under partial load
The bottom dead point has the pressure holding time, programmable, to ensure the accuracy of different parts
With the function of slow rebound control, the operator can better control the workpiece.
Comfortable operation with highly modern technology, will greatly improve the efficiency of the machine tool.
