shearing machine

Specifications for the use of  Hydraulic  Ironworker machine: 1. First of all, before opening, it is necessary to check whether the screws and pins of the punching and shearing machine, including the transmission parts, are well connected, whether there is a loose phenomenon, and check whether the ground wire is well grounded. 2. All parts should be lubricated before work. Do not feed first. After a few minutes of trial rotation, it feels no problem. 3. Do not overwork when… Read More »Specifications for the use of  Hydraulic  Ironworker machine

Safety and maintenance knowledge of hydraulic swing beam shearing machine 1. Be familiar with the structure, performance and operation instructions of the machine. 2. There is no need to adjust the hydraulic cutting of the machine under normal use. 3. Regularly check the sharpness of the cutting edge, and if the cutting edge is blunt, it should be replaced with another cutting edge or sharpened in time. The blade only needs to sharpen the thickness plane. 4. The net type… Read More »Safety and maintenance knowledge of hydraulic swing beam shearing machine

Preparation work before operation and control of hydraulic pendulum type plate shearing machine: 1, cleaning the oil on the surface of the machine parts, inspection ball valve should be in the open position. 2, each part of the lubrication oil injection. 3. Add 46 hydraulic oil into the oil tank. 4, the machine is grounded, connected to the power supply, check the coordination between the electrical actions. 5, the shear sheet material, in line with the material σ6=45Kg/mm2 σ6=20% if… Read More »Preparation work before operation and control of hydraulic pendulum type plate shearing machine

Sheet metal shearing machine operator post responsibility system  First, the staff should strictly abide by the safety technical operation procedures of the plate shearing machine. Two, the staff should be familiar with the general structure, principle and other knowledge of the plate shearing machine, can carry out general fault processing on the equipment. three. Timely maintenance of the equipment is required to ensure that the equipment is in good condition. Four, can identify shear material, reasonable use of equipment Five,… Read More »Sheet metal shearing machine operator post responsibility system

Using the method of plate shearing machine: 1. Before starting the machine, the upper and lower blades should be calibrated, and the material retaining device should be adjusted, and the work can start after the air cutting 2-3 times. 2, the gap between the blade should be determined according to the thickness of the shear steel plate, not more than 1/30 of the thickness of the steel plate. 3. The shear material shall meet the requirements and shall not exceed… Read More »Using method of plate shearing machine

Specifications for the use of Q35Y Hydraulic Ironworker Machines: 1. First of all, before opening, it is necessary to check whether the screws and pins of the punching and shearing machine, including the transmission parts, are well connected, whether there is a loose phenomenon, and check whether the ground wire is well grounded. 2. All parts should be lubricated before work. Do not feed first. After a few minutes of trial rotation, it feels no problem. 3. Do not overwork… Read More »Specifications for the use of Q35Y Hydraulic Ironworker Machines-Ironworker machines for sale

 Plate shearing machine in the process of use should pay attention to the matters: 1. Start the plate shearing machine for idling several cycles, to ensure that under normal circumstances, test shear different thickness of sheet material, from thin to thick.Ensure that users know the function of the plate shears. 2. Different blade gaps must be adjusted when the thickness of the plate is different.If the corresponding blade clearance is not adjusted, the blade resistance cost will be affected. 3.… Read More »Plate shearing machine in the process of use should pay attention to the matters