metal press brake

There are many kinds of servo bending machine, and there are certain differences in performance and efficacy. Some enterprises are really not good to make a choice when choosing, so today we will learn which enterprises are more suitable for buying servo bending machine. One: the cost performance requirements. Servo energy-saving bending machine overall cost performance will be higher, because in the use of a long time, its energy-saving characteristics are very obvious, so in the subsequent use of the… Read More »Which enterprises are more suitable for servo bending machine?

1. What is the price of the bending machine? Bending machine, it can be reclassified. So we still have several specific categories, so in question 1, the answer is "yes". In addition, this is a point that we must be clear and understand. The price of the bending machine is mainly related to specific models and configurations, manufacturers, etc., so it is necessary to consider comprehensively in order to make an accurate judgment. 2. About the price of the bending… Read More »How to consider the price of bending machine, how to report the price of bending machine?

Bending machine mold in actual use need to pay attention to: 1, bending machine die 88° why can press out 90°. Because the metal plate has a certain elasticity, ordinary cold rolled plate mold Angle 88° can be, but stainless steel only needs 86°, some elastic only 83° on the line, aluminum hardness is low, elasticity is small, the mold Angle must be 90°, so do you understand, in addition, the Angle of the mold is mainly determined by the… Read More »How to choose CNC bending machine die and use process need to pay attention to a few points?

 1. First turn on the power supply of 160 tons 4 meters hydraulic bending machine (160T/4000), turn on the button switch on the control panel, and then press the oil pump to start, so that you can hear the rotating sound of the oil pump. (The machine does not move at this time) 2, stroke adjustment, 160 tons 4 meters hydraulic bending machine (160T/4000) must pay attention to adjust the stroke, bending must be tested. At the bottom of the… Read More »160 tons 4 meters hydraulic bending machine (160T/4000) operation method

The electro-hydraulic control system in the wc67y hydraulic press brake can be divided into open loop control system and closed loop control system. The beam of the bending machine is the main control part of the system. 1. The closed loop The closed loop is also known as a feedback control system. The system compares the measured value of the system output with the expected given value, so as to produce the deviation signal, and then uses the signal deviation… Read More »What is the main control part of the wc67y hydraulic press brake?

CNC bending machine has been widely used, but the price is also different, in addition to related to hardware and specification, CNC bending machine much more compared to ordinary bending machine CNC system is an important point of comparison, the different types of numerical control system, can also lead to the price of CNC bending machine, today we take a look at what CNC system is the classification of CNC bending machine? First we need to know what is a… Read More »What are the classification of CNC bending machine CNC system?