Guillotine Shearing cost

QC12Y-6×3200 hydraulic pendulum plate shearing machine technology and technology 1, this machine is a new generation of hydraulic plate shearing machine. Advanced hydraulic integrated valve block is adopted. Compact structure, reduce pipe connection, improve the reliability and easy maintenance of the system. 2, the series cylinder makes the machine in the shear, the cylinder synchronization is good, shear Angle will not change. 3. The mounting surface of the blade on the tool holder is helical to ensure the uniformity of… Read More »QC12Y-6×3200 hydraulic pendulum plate shearing machine technology and technology

8x2500 hydraulic plate shearing machine maintenance method: Operate in strict accordance with the operating procedures. 2, each time before starting, according to the requirements of lubrication chart, timed, fixed point, quantitative lubricating oil, oil should be clean without precipitation. 3, the machine must always keep clean, not paint part of the anti-rust oil. 4, the lubrication oil in the motor bearing should be replaced and filled regularly, and often check whether the electrical part works normally, safely and reliably. 5,… Read More »8x2500 hydraulic plate shearing machine maintenance method and performance characteristics

To make the Shearing Machine For Sale of different materials can be cut according to the required size, NUMERICAL control hydraulic bending machine, this is also the need for equipment with so many functions. This has not only greatly improved the efficiency of the work, but also played a perfect role in the operation of the whole society. And the importance of plate shearing machine in practical application is fully reflected in the well-known aviation, light industry, metallurgy technology, chemical… Read More »The working principle of Shearing Machine For Sale is really a dynamic system that we can understand.

Safety technical measures of hydraulic plate shearing machine: Plate shearing machine is a kind of shearing equipment which is widely used in machining industry production. It can shear various thickness of steel plate materials. The commonly used shears are divided into flat shears, rolling shears and vibration shears, among which the shears are the most used. The shears with shear thickness less than 10 mm are mostly mechanical transmission, and those with shear thickness greater than 10 mm are hydraulic transmission. Single… Read More »Safety technical measures of hydraulic plate shearing machine

The working effect of the hydraulic plate shears is closely related to its debugging and correct operation. Today we will introduce the debugging and correct operation steps of the hydraulic plate shears. Now, we first introduce the correct operation of the hydraulic plate shears to you: 1, start the machine for several idling cycles, ensure that under normal conditions, test shear different thickness of sheet, from thin to thick. Ensure users are familiar with machine performance. 2.The gap between different blades… Read More »What are the main points of concern in operating a hydraulic plate shears?

After shearing, the Shearing machine 10x6000 should ensure the straightness and parallelism of the shearing surface of the shearing plate, and minimize the distortion of the plate, so as to obtain high-quality workpieces. The upper blade of the shearing machine is fixed on the tool rest, and the lower blade is fixed on the workbench. A supporting ball is installed on the work table so that the sheet material will not be scratched when sliding on it. The rear stopper is… Read More »Shearing machine 10x6000 mechanical rear file material structure

Maintenance measures of plate shearing machine: The plate shearing machine is operated in strict accordance with the operating rules. Add lubricating oil at regular time, fixed point and quantitative according to the requirements of the lubrication chart before starting the plate shearing machine each time. The oil should be clean and without precipitation. The machine tool of the plate shearing machine must always be kept clean and the unpainted part of the rust proof grease. The lubricating oil in the… Read More »What should I do to maintain the shearing machine?

The QC12Y-6×6000 plate shearing machine features an all-steel welding structure, including the wall panel, worktable, and tool rest body.

Cautions for cutting edge of plate shearing machine 1, the plate shearing machine should be responsible for the use and custody of a special person. The operator must be familiar with the structure and performance of the machine tool. 2. It is strictly prohibited to use the plate shearing machine over load. No shear hardening steel, hard steel, high speed steel, alloy steel, castings and non-metallic materials. 3. The blade edge should be kept sharp, dull or damaged, and should be polished… Read More »Cautions for cutting edge of plate shearing machine

I. QC12Y - 6 x 6000 plate shears Technology and process 1. This machine is a new generation of hydraulic plate shears. Adopt advanced hydraulic integrated valve block. Compact structure, reduce pipeline connection, improve the reliability and easy maintainability of the system. 2, the series cylinder makes the machine tool in the shear, the cylinder synchronization, shearing Angle will not change. 3. The mounting surface of the blade on the tool rest is a spiral surface, which ensures the uniformity… Read More »QC12Y - 6 x 6000 plate shears Technology and process