durmapress

Before carrying out machine maintenance or wiping machine, the upper die should be aligned with the lower die and then put down and shut down until the work is finished. If it is necessary to start up or other operations, the mode should be selected in manual and ensure safety. Its maintenance content is as follows: 1. hydraulic Press Brake Machine Hydraulic oil circuit 1) Check the oil level of the tank every week. If the oil level is lower… Read More »Late maintenance and maintenance of hydraulic Press Brake Machine

Bending machine failure causes and solutions - sometimes the main motor automatically stop, heat relay, circuit breaker protection Bending machine failure reasons: 1. Proportional pressure valve and main pressure reducing valve are stuck, and the machine has been pressurized; 2. The filter element is blocked, the oil output is not smooth, and the oil pump pressure is always high; 3. The oil has been polluted for too long time; 4. Poor oil quality; 5, circuit breaker, heat relay problems, can… Read More »Bending machine failure causes and solutions - sometimes the main motor automatically stop, heat relay, circuit breaker protection

Oil-electric hybrid CNC bending machine in bending size control method: to avoid cumulative error, each processing a fold to measure the expansion size; Must be bending machine has bent edge of the product, the front bending Angle should be slightly less than 90 degrees before the formal addition of the first inspection, inspection in the process of processing: avoid the choice of different heart of the tool, before adding a confirm that a die tip in the same line: the… Read More »How to control bending Angle of Oil-electric hybrid CNC bending machine?

What is the maintenance process of CNC bending machine First, hydraulic oil circuit 1. The hydraulic oil used in CNC bending machine is ISO HM46 or MOBIL DTE25; 2. Check the oil level of the tank every week, including after the maintenance of the hydraulic system. If the oil level is lower than the oil window, add hydraulic oil; 3. The system oil temperature should be between 35℃ and 60℃, not more than 70℃, if too high will lead to… Read More »What is the maintenance process of CNC bending machine

TPM8 series CNC bending machine performance characteristics: ● The machine body is optimized by finite element to ensure high strength and high rigidity when the machine is used. ● Compared with the traditional CNC bending machine, increase liquid filling flow, oil pump displacement, Y axis movement frequency compared with the mainstream bending machine market increase about 25%. ● High frequency proportional valve is used to ensure high stability and precision in the process of high-speed operation. ● Increase the sealing… Read More »TPM8 series CNC bending machine performance characteristics:

Durmapress offers a range of CNC E21 hydraulic press brakes and WC67Y series hydraulic sheet press brakes designed to meet various industrial needs. These machines are built to provide precision, reliability, and efficiency in metalworking applications.

The structure of the mechanical three-roller symmetrical bending machine is three-roller symmetrical, the upper roller in the central symmetrical position of the two lower rollers for vertical lifting movement, through the screw screw female worm drive and obtained, the two lower rollers for rotary movement, through the output gear of the reducer and the lower roller gear meshing, for rolling plate to provide torque. The disadvantage of this machine is that the plate end needs to be prebent by other… Read More »Mechanical three-roller symmetrical plate winding machine