How to operate the shearing machine 10x6000 correctly - start the shearing machine for idling a number of cycles, to ensure that under normal circumstances, try to shear different thickness of the plate, from thin to thick. Ensure users are familiar with the shearing machine performance.
Different blade clearance must be adjusted for different plate thickness. If the blade clearance is not adjusted, the durability of the blade will be affected.
Plate shear in the process of cutting open the pressure gauge switch, observe the oil pressure value, shear 12mm plate pressure should be small
In the 20 mpa. The pressure of the remote pressure regulating valve No9 is set at 20-22mpa when it leaves the factory. The user must abide by this regulation and shall not increase the pressure for cutting beyond the specified material surface, resulting in machine damage. Sound balance during operation. Stop the shearing machine for inspection if there is any noise.
Oil tank temperature increases when shears operate. Power off and rest when 60 degrees exceeds.
Shearing machine in the use of the process may produce the following situation
Ensure that under normal conditions, start the shearing machine for idling several cycles. Test shear different thickness of the sheet, from thin to thick. Ensure users are familiar with the shearing machine performance.
It affects the durability of the blade. Different blade clearance must be adjusted for different plate thickness. If not adjusted to the corresponding blade clearance. Observe the oil pressure value, 3 plate shear in the process of cutting open the pressure gauge switch. The pressure shall be less than 20MPa when cutting 12mm plate. The remote pressure regulating valve No9 sets the pressure when leaving the factory at 2022MPa. Users must comply with this. Damage to the machine. Stop for inspection. Sound balance during operation. Shearing machine if there is noise.
Oil tank temperature increases when shears operate. Power off and rest when exceeding 60 degrees.
