The most powerful CNC controller in its class. Graphical programming at the highest level with a large 15 '' touch screen for maximum ease of use to get the most out of your machine.
General software functions
Numerical and graphical 2D programming with automatic calculation of the Y-axis based on tool, material and programmed angle as well as automatic calculation of the position of the X, R or
Z axis
Graphical 2D tool programming
Automatic calculation of the bending force
limitation based on the max. Load capacity of the tools
Automatic calculation of the crowning
Automatic calculation of stock size
Automatic management of folded sheets
Automatic calculation of the bending radius curvature for large bending radii
Programmable workpiece counter
Switch between mm / inch
Windows®-like user interface
Network connection / remote maintenance
Optional software features
Graphical 2D workpiece programming
2D representation of the machine structure, the workpiece and the tools
Automatic calculation of bending order
Angle correction database with the ability to apply the corrections to the angle, material or tool. Corrections are automatically loaded into the new programs
3D Profile View (Extrusion Viewer)
Interface for LED strips from Wila and Esautomotion
Mitutoyo goniometer interface for correcting the bending angle (cable included)
General features
Programmable axes and auxiliary functions
Control of hydraulic axes with proportional or servo valves, DC and AC motors, brushless motors and converters, both traditional analog and fieldbus (Sercos, CAN, Mechatrolink, etc.)
Auxiliary axis management, connection to a robot with synchronization of robot / press programs, coupled presses (tandem)
Integration of a safety PLC (Pilz, Fiessler, Lazer Safe, MCS)
Modifiable PLC (IEC 61131-3) with function blocks both in STL and "C"
Customizable alarm management
Hardware features
24 VDC power supply, 50 W max.
CPU VIA Eden® X1 1.06 GHz, 1 GB RAM
15.6 '' TFT LCD display with 1366x768 WSVGA resolution, glare protection
Resistive single touch
128 MB SSD (Flash Disk)
Ergonomic housing with external USB port
Integrated machine operator panel for hard keys (optional)
Hardware interfaces
2x RS-232
1x Ethernet 10/100 MBit network connection
1x CANopen (2x CANopen optional)
2x USB 2.0
Program memory and tool memory
SSD flash disk with space for at least 7,000 programs and 7,000 tools
Axes
Maximum 6 CNC axes
In addition, control of the hydraulic crowning or
Wila inputs with single-ended incremental encoder
(5 V TTL) or Line Driver (RS 422)
Max. Encoder input frequency 500 kHz
Inputs and outputs
32 opto-isolated digital inputs PNP 24 VDC
32 opto-isolated digital outputs 24 VDC,0.7 A, short-circuit proof
4 analog inputs 12Bit (0-5V, 0-10V)
2 analog outputs 12Bit (0-10V)
Direct control for pressure valve and crowning valve (max 3 A)
Direct control of proportional valves for Y1 and Y2 with and without feedback (maximum 2.8 A)
I / O expansion via ESAring interface with up to 128 digital inputs, 128 digital outputs, 8 analog inputs, 8 analog outputs (optional)
Offline Software
Free offline software for Windows®
Analogous to the programming software of the CNC control on the machine
Complete bending simulation
