The most powerful CNC control with Panel PC. Graphical 3D programming at the highest level with an extra large 19 '' multitouch control panel for optimal ease of use to get the most out of your machine.
General software functions
Graphical 2D programming of workpiece and tool
Presentation of the machine structure, the workpiece and the tools
Automatic calculation of the bending force limitation based on the max. Load capacity of the tools
Automatic calculation and optimization of the bending order
Management of 3D CAD / CAM images
Automatic calculation of the crowning
Automatic calculation of stock size
Automatic management of folded sheets
Automatic calculation of the bending radius curvature for large bending radii
Multi-tandem management for the combination of tandem or multi-tandem presses (max 4)
Programmable workpiece counter
Switch between mm / inch
Windows® user interface
Network connection / remote maintenance
Optional software features
Dynamic error compensation of the machine during the bending process by the CNC / drives (dynamic crowning)
Management of bending angle measurement and relative dynamic compensation during bending
Automatic determination of sheet thickness
Angle correction database to apply corrections to the angle, material or tool. Corrections are automatically loaded into the new programs
Interface for LED strips from Wila and Esautomotion
Mitutoyo goniometer interface for correcting the bending angle (cable included)
General features
Programmable axes and auxiliary functions Control of hydraulic axes with proportional or servo valves, DC and AC motors, brushless motors and converters, both traditional analog and fieldbus (Sercos, CAN, Mechatrolink, etc.)
Auxiliary axis management, connection to a robot with synchronization of robot / press programs, coupled presses (tandem)
Integration of a safety PLC (Pilz, Fiessler, Lazer Safe, MCS)
Modifiable PLC (IEC 61131-3) with function blocks
both in STL and "C"
Customizable alarm management
Hardware features CNC
24 VDC power supply, 50 W max.
VIA Eden® X1 1.06 GHz, 1 GB RAM
128 MB SSD (Flash Disk)
2x USB 2.0
1x Ethernet 10/100 MBit (2x optional)
2x RS-232
1x CANopen (2x optional)
Hardware features Panel PC
24 VDC power supply, 70 W max.
AMD GX-424CC 2.4 GHz, 4 GB RAM
64 GB SSD (MSATA)
19 '' TFT LCD display with 1280x1024 SXGA resolution, glare protection
Capacitive PCAP multitouch control panel
Ergonomic housing
2x USB 2.0 external, 2x USB 2.0 internal
2x Ethernet 10/100/1000 Mbps
2x RS-232
Program memory and tool memory
SSD with space for at least 1,000,000 programs and tools
Axes
4 CNC axes (6 optional)
Control of the hydraulic crowning or Wila inputs with single-ended incremental encoder (5 V TTL) or line driver (RS 422)
Max. Encoder input frequency 500 kHz
Inputs and outputs
32 opto-isolated digital inputs PNP 24 VDC
32 opto-isolated digital outputs 24 VDC,
0.7 A, short-circuit proof
4 analog inputs 12Bit (0-5V, 0-10V)
2 analog outputs 12Bit (0-10V)
Direct control for pressure valve and crowning valve (max 3 A)
Direct control of proportional valves for Y1 and Y2
with and without feedback (maximum 2.8 A)
I / O extension via ESAring interface with up to 512
digital inputs, 512 digital outputs, 8 analog inputs,
8 analog outputs (optional)
Offline Software
Free offline software for Windows®
Analogous to the programming software of the CNC control on the machine
Complete bending simulation
