Sheet bending machine, we referred to as bending machine, it is a kind of machine used for bending thin plate,
can let the sheet a forming, using a simple mold, pressing out the plate shape we need.Usually this kind of mechanical equipment is used in electronic industry,
electrical industry, instrument industry, instrument industry and other industries. Bending machine is composed of bracket,
clamping plate and table, the parts are connected to each other, so as to make the machine run, we come to understand its operation principle.
1. Switch on the power supply of the bending machine, open the switch device on its control panel, and then open the oil pump. At this time, the oil pump rotates,
and the machine has not started to operate.
2. Before bending, test whether there is a certain gap distance between the upper die and the bottom,
about the thickness of a plate. Do a good test to ensure that the mold machine is not damaged.
3, choose a notch width about 8 times the thickness of the plate, such as bending a thickness of 5 mm plate, our notch width is about 40 mm.
4, the foot switch starts to run the machine, relying on the foot force to operate, when we release the foot, the machine will stop, and then step on will continue to run.
The above is the operation principle of the bending machine, it can well meet the needs of all kinds of workpiece,
for some plate bending is very convenient. Double bending machine has the need to go to the market to know about it.
