1. Before starting, check whether the driving parts and connecting screws and pins of the punching and shearing machine are loose. Whether the electrical equipment is properly grounded.
2. Lubricate each part before work, drive test turn two to three minutes, no problem can be put into work.
3. No overload is allowed, quenching steel is forbidden to shear punching and shearing machine.
4. When working, you should wear gloves and labor protection articles. Sandals and slippers are strictly prohibited.
5. When punching and shearing, oil should be often given to punching tools to prevent up and down punching tools from skew.
6. When feeding, we should pay attention to finger safety, especially when the plate is rushed to the last pressing foot can not press the plate, it is forbidden to shear.
7. When driving, it is forbidden to disassemble and proofread the cutting edge and die:. Do not hit the die, cutting edge and other parts with force.
8. Strictly control the specification range of sheet material, beyond the punching shear is strictly prohibited.
9. Other articles and a large amount of washing materials shall not be piled up in the workplace, and the adjustment and cleaning must be stopped.
1 o. When the work is finished, stop the machine, cut off the power, clean up the site.
