Lifting and installation of hydraulic sheet bending machine lifting and installation
Hydraulic bending machine use method introduction:
1, first of all, switch on the power supply, open the key switch on the control panel, and then press the oil pump initiative,
how you can hear the rotating sound of the oil pump. (This opportunity device does not move)
2, route regulation, the use of bending machine must be stable conditioning road, before bending is not necessarily a test run.
Bending machine die up to the bottom must ensure that there is a plate thickness clearance. Otherwise it will cause waste to the mould and machine.
The conditioning of the distance is also electric transient adjustment and manual stomach adjustment.
3, bending notch choice, usually to determine the thickness of the plate 8 times the width of the notch. For bending 4mm sheet metal, choose about 32 notches.
4, rear stopper mediation usually have electric quick adjustment and manual fine tuning, the same as the shearing machine.
5, step on the foot switch origin bending, bending machine and shearing machine differences, may relax at any time, pinch the foot bending machine will stop, continue to step up.
Through the process of the above specific teaching, I believe you have a further understanding of the hydraulic bending machine.
