Semiannual maintenance of the fiber laser cutting machine 6kw (or after 2000 hours of operation)
1) Check whether there is corrosion in the cooling water pipeline of the laser head. If there is, the pipeline should be treated or replaced in time.
2) Check whether the fuel tank of the excitation power supply leaks oil.
3) Check whether the high-voltage cable is damaged.
4) Check and clean the inside of the laser resonator and all the lenses, including the front window mirror, tail mirror and reflector, etc.
5) after the laser internal lens cleaning, Maanshan Ruike fiber laser cutting machine 6kw , should readjust the light mode of the laser, until the correct mode.
6) Replace the vacuum pump oil.
7) replace root pump oil.
8) Carefully tighten all screw plugs to ensure the air tightness of Roots pump.
9) There is a white plastic plug on the gas shunter row at the outlet end of Roots pump. Clean the plug and coat its inner surface with silicone grease. The purpose of the silicone grease is to adsorb and capture the physical impurities in the circulating gas of the laser. (Use only silicone free high vacuum grease, and apply very thinly).
Maanshan Durmapress Machinery Technology Co.,Ltd is a professional research and development, production of industrial laser cutting machine modern manufacturing enterprises, Raike laser cutting machine is the first batch of high-tech enterprises introduced in Wuxi New Area Photoelectric Science and Technology Industrial Park, the company has 10,000 square meters of standardized workshop.
