máquina de corte

Sheet metal shearing machine operator post responsibility system  First, the staff should strictly abide by the safety technical operation procedures of the plate shearing machine. Two, the staff should be familiar with the general structure, principle and other knowledge of the plate shearing machine, can carry out general fault processing on the equipment. three. Timely maintenance of the equipment is required to ensure that the equipment is in good condition. Four, can identify shear material, reasonable use of equipment Five,… Ler mais "Sheet metal shearing machine operator post responsibility system

Using the method of plate shearing machine: 1. Before starting the machine, the upper and lower blades should be calibrated, and the material retaining device should be adjusted, and the work can start after the air cutting 2-3 times. 2, the gap between the blade should be determined according to the thickness of the shear steel plate, not more than 1/30 of the thickness of the steel plate. 3. The shear material shall meet the requirements and shall not exceed… Ler mais "Método de utilização da máquina de corte de chapa

Specifications for the use of Q35Y Hydraulic Ironworker Machines: 1. First of all, before opening, it is necessary to check whether the screws and pins of the punching and shearing machine, including the transmission parts, are well connected, whether there is a loose phenomenon, and check whether the ground wire is well grounded. 2. All parts should be lubricated before work. Do not feed first. After a few minutes of trial rotation, it feels no problem. 3. Do not overwork… Ler mais "Specifications for the use of Q35Y Hydraulic Ironworker Machines-Ironworker machines for sale

 Plate shearing machine in the process of use should pay attention to the matters: 1. Start the plate shearing machine for idling several cycles, to ensure that under normal circumstances, test shear different thickness of sheet material, from thin to thick.Ensure that users know the function of the plate shears. 2. Different blade gaps must be adjusted when the thickness of the plate is different.If the corresponding blade clearance is not adjusted, the blade resistance cost will be affected. 3.… Ler mais "Plate shearing machine in the process of use should pay attention to the matters

Hydraulic pendulum plate shears feature a durable rectangular lower blade and an adjustable auxiliary knife seat for easy blade adjustments. The integrated hydraulic system ensures reliable and safe operation, while the servo motor-driven rear stopper provides precise positioning for various plate thicknesses. These shears offer efficient processing with automated cutting technology, making them ideal for high-quality metalworking applications.