The best quality press brake adopts hydraulic transmission mode, so its slide block part is composed of slide block,
oil cylinder and mechanical block fine-tuning structure; The left and right cylinders of the bending machine are fixed on the frame
so that the piston drives the slider through hydraulic pressure
Up and down movement, the mechanical block by the NUMERICAL control system control adjustment value
CNC folding machine stroke adjustment, the use must pay attention to the adjustment of stroke, must be tested before bending,
its upper die to the bottom must ensure that there is a plate thickness gap. Otherwise it will cause damage to the mould machine.
Stroke adjustment is also electric quick adjustment. Step on the foot switch to start bending, CNC bending machine mold and frying machine is different,
can be loosened at any time, loosen the foot will stop, continue to step down. CNC bending machine bending notch selection,
generally choose the plate thickness of 8 times the width of the notch. For bending 4mm sheet metal, choose about 32 notches.
The components of the bending machine coordinate with each other to comprehensively improve the efficiency, accuracy,
maintainability, versatility and security of the system, reduce the manufacturing materials, it is very convenient to use so in the usual use process
In, we must pay attention to all aspects of the bending machine.
