1. Comply with general 3 kw fiber laser cutting machine safety procedures. Start the laser in strict accordance with the laser starting procedure.
2. The operator must be trained, familiar with the structure and performance of the equipment, and master the knowledge of the operating system.
3. Wear labor protection equipment according to the provisions, and wear protective glasses in accordance with the provisions near the laser beam.
4. Do not process a material until it is clear whether it can be lasered or heated to avoid the potential hazard of smoke and steam.
5. When the equipment starts, the operator shall not leave his post or do anything unrelated to the processing 3 kw fiber laser cutting machine.
6. Keep fire extinguishers within easy reach. Do not process to turn off the laser or light brake; Do not place paper, cloth or other flammable objects near unprotected laser beams.
7. Maintenance of the laser internal, to comply with the following high pressure safety procedures:
(1) Turn off the high pressure key switch S8 (LOCKED position), and remove it, well, to lock the high pressure;
(2) Discharge the high voltage capacitor with a high voltage rod;
(3) do not overhaul the laser alone.
8. In the process of processing found abnormal, should immediately stop, timely troubleshooting or notify the relevant departments.
9. Keep the laser, bed and the surrounding area clean, orderly and free from oil pollution, and pile up the workpiece, plate and waste materials as required.
10. High pressure safety regulations should be observed during maintenance. Maintenance per 40 hours of operation or weekly, 1000 hours of operation or every six months shall be carried out in accordance with rules and procedures.
