How to adjust 1000 watt fiber laser cutting machine
1, first ensure that the beam from the laser tube into the center of the 1# mirror
2. Paste double-sided tape in front of the 2# mirror, move the beam to the position closest to the laser tube, and mark it according to the point (control the proper light intensity).
3, gradually move the beam to the farthest position from the laser tube, according to the point, mark on a mark.
4. If the two marks do not coincide, adjust the 1# mirror so that the two marks coincide at the center.
5. Repeat steps 2 to 4 until the two mark centers coincide completely.
6, paste double-sided tape paper in front of the 3# mirror, move the car (laser head) to the position closest to the 2# mirror, according to the point (control the appropriate light intensity), make a mark.
7, gradually move the laser head (car) to the farthest position from the 2# mirror, according to the point (it is best to use a piece of cardboard first, first measure the location of the light spot, in order to prevent injury), make a mark.
8. If the two marks do not coincide, adjust the 2# mirror so that the two marks coincide at the center.
9. Repeat steps 6 to 8 until the two mark centers coincide completely.
