Plate shearing machine in the process of use should pay attention to the matters:
1. Start the plate shearing machine for idling several cycles, to ensure that under normal circumstances, test shear different thickness of sheet material, from thin to thick.Ensure that users know the function of the plate shears.
2. Different blade gaps must be adjusted when the thickness of the plate is different.If the corresponding blade clearance is not adjusted, the blade resistance cost will be affected.
3. Switch on the pressure gauge during the shearing process of the plate shearing machine, observe the pressure value of the oil circuit, the pressure should be less than 20MPa when shearing 12mm plate.This remote pressure regulating valve NO9, the factory pressure set 20-22Mpa, the user must abide by this demarcation, shall not be cut over the demarcation of material surface pressure, causing damage to the machine.
4. Sound balance during manipulation.If there is any noise in the shearing machine, park the car for inspection.
5. The temperature of oil tank improvement when the plate shears are operated.60 degrees over the period of shutdown rest.