The difference between Plate shearing machine manufacturer and ordinary shearing machine lies in its intelligent control system, so many customers used to ordinary shearing machine in the purchase of CNC shearing machine, CNC shearing machine familiarity is not enough, easy to cause damage to the machine.
Program - part machining program written by the programmer.
Input equipment - the operation equipment that inputs programs and instructions into CNC, mainly responsible for inputting programs and parameters. CNC shears system operation panel, tape machine, computer)
Output device - to output or display programs, parameters, instructions, etc., for the operator to control.
4 CNC computer digital control system, the brain of the whole machine tool, all control instructions are announced from this, including interpolation operation, orbit control, azimuth control, alarm display, program display and so on.
5 programmable controller - that is, the interface between PLC or PC machine tool and CNC, because CNC can accept and control the signal is weak electric signal, and the machine tool auxiliary some are strong electric signal, such as cooling, lubrication, etc., must be added between the signal isolation conversion equipment, otherwise not only increase the power consumption of the system, More importantly, interference with the normal operation of the system.
Spindle servo - power amplification to spindle operation instructions (direction, speed, etc.) announced by CNC, drive spindle motor to rotate.
7 Spindle motor.
8Servo amplifier -- power magnifies the axis displacement instructions announced by CNC, and drives the servo motors of each axis to rotate.
9 Servo motor - drives the screw of each axis to rotate, and drives the work table of CNC shears to move.
10 azimuth check -- Directly or indirectly measure the azimuth of the work table and reflect it to CNC for internal comparison, then output displacement instructions to control the work table for further movement.
