What are the maintenance procedures of the plate shearing machine? Specifically speaking, mainly includes the following content, as: minor repair, repair, overhaul, test and acceptance, the following are starting from these four aspects, to introduce the plate shears maintenance procedures in detail, so that the reader will have reference in the future.
A, minor repairs
1. Disassemble and inspect parts that are seriously worn.
2. Remove dirt, accumulate material, adjust clearance and relative position, replace or repair parts that can't be used, and repair parts that can't reach precision.
3. Partial repair and scraping or filling of scratches and dents.
4. The appearance of the equipment is generally not painted during minor repairs.
Second, to repair
1. Disassemble and decompose the parts that need maintenance.
2. Repair main parts and reference parts, replace or repair parts that cannot be used.
3. Repair and scrape the sliding surface of parts that lose precision or scratch the fuzz slider, slide way and so on.
4. It can be repaired in the on-site disassembly or in the transport repair workshop. If necessary, the surface of the equipment should be repainted or sprayed.
Three, overhaul
1. Disassemble all the partial assembly parts and transport them to the machine repair workshop, and then decompose and clean the parts and components.
2. Repair reference parts, replace or repair all unqualified parts.
3. Machining or scraping all datum surface and sliding surface.
4. After the whole machine is assembled, the surface of the equipment shall be painted, and then the precision inspection and test run acceptance shall be carried out.
d without leakage.
(4) the motor movement of each part should be tested manually first, and then the motor test should be carried out after confirmation and no obstruction.
