The cooling system of laser welding machine 1000w mainly includes water cooling, air cooling and water cooling air cooling in one system.
Water cooling is widely used. Here's how it works:
1, laser welding machine chiller generally has a filter, can effectively filter out the obvious particle impurities in the water,
keep the laser pump chamber clean and prevent the possibility of water plugging.
2. The chiller uses pure water or deionized water, which is more conducive to pumping the light source
directly into the laser material, and can produce a better laser mode.
3, the laser welding machine chiller is generally equipped with water pressure gauge,
can know at a glance how the water pressure in the laser water.
4, cold water machine adopts imported compressor, water tank and water pump is stainless steel material, heat transfer coil is also use stainless steel materials, so can guarantee the stability of the cold water machine work, refrigeration effect is very good, can achieve within 1 ℃, the temperature precision control of temperature is smaller, the laser is affected by temperature was low, however, we suggest that the temperature is set to 1 degrees or so as well...
5. The laser welding machine chiller is generally powered by 220V household electricity, rather than 380V three-phase electricity, which is more conducive to the versatility of the equipment.
6, the chiller with flow protection, when the water flow is less than the set, there is a signal alarm, can be used to protect the laser and related to heat dissipation devices.
