Related operating steps of fiber laser cutting machine 4000w:
1. According to the material and thickness, call the corresponding parameters
2. Detect cutting parameters. Select the corresponding lens and laser and check whether they are in good condition
3. Adjust the cutting head to the right focus
Four, check and adjust the nozzle center
Five, cutting head sensor calibration
Six, cutting gas inspection, input open auxiliary gas command, observe whether it can be well ejected from the nozzle
Seven, according to the preparation of cutting materials into the fixed table above.
VIII. Trial-cut of materials, check section conditions and adjust process parameters until production requirements are met
Nine, cut out the first piece of work, pause cutting to see if it meets the requirements
Ten, according to the workpiece requirements of the drawing of the cutting program, and import into CNC
11. Move the cutting head to the starting point of cutting and press "Start" to execute the cutting procedure (there will be automatic reset under normal circumstances).