Hydraulic sheet bending machine bending method details:
1. First, switch on the power supply, open the key switch on the control panel, and then press the oil pump to start,
so that you can hear the rotation sound of the oil pump. (The machine does not move at this time).
2, stroke adjustment, the use of bending machine must pay attention to the adjustment of stroke, must be tested before bending,
bending machine die down to the bottom must ensure that there is a plate thickness gap,
otherwise it will cause damage to the mold and machine, stroke adjustment is also electric quick adjustment and manual stomach adjustment.
3, bending notch selection, generally choose the plate thickness of 8 times the width of the notch, such as bending 4mm plate, need to choose about 32 notch.
4, rear stopper adjustment generally has electric quick adjustment and manual fine tuning, the method is the same as the shearing machine,
5, step on the foot switch to start bending, bending machine and shearing machine is different, can be loosened at any time, loosen the foot bending machine will stop, continue to step down.
Hydraulic plate bending machine has higher labor productivity and higher bending accuracy.
The machine is a steel plate connection mechanism, with enough strength and stiffness, hydraulic transmission to ensure that the
work is not due to plate thickness change or improper selection of V groove under the die caused by serious overload accident.