Steel wire bending machine press brake is a very common industrial field of wire processing equipment, and in the process of processing in order to ensure the processing accuracy of wire,
generally need to adjust the line, to ensure that the wire in the steel wire bending machine straightening,
ow to wire bending machine press brake?
Today xiaobian will introduce the operation method of wire bending machine:
1. Relax the straight line adjusting screws on the front and back straight line adjusting seats of the steel wire bending machine respectively.
2. Pull the wire out from the wire feed frame, through the scraper hole, and respectively into the groove of the straight line on the
front and back straight line seat of the wire bending machine.
3. Turn the adjusting screw of linear perin moderately.
4. Send the wire to the wire plate seat on the wire feeding unit lightly by hand, and check and adjust the action.
Including checking whether the feed line is smooth; Check whether the sent line body is extruded and deformed;
Check whether the wire body sent out is straight, and align with the back wire plate holder.
The solution to the left and right deviation occurs when the line adjustment and alignment of the steel wire bending machine:
1. If the line of the sending line is offset to the left, the adjustment screw on the left should be relaxed,
and then the adjustment screw on the right should be tightened properly, so that the sending line is straight.
2. If the line of the sending line is offset to the right, the adjustment screw on the right should be relaxed,
and then the adjustment screw on the left should be tightened properly, so that the sending line is straight.
