Each fiber laser machinery will have the corresponding operation steps, corresponding to different brands, although some are roughly the same, but in the relevant detailed issues are different, Shenzhen Qunying laser cutting operation knowledge is as follows:
First, according to the material and thickness, call the corresponding parameters fiber laser machinery
Two, check the cutting parameters, select the corresponding lens and laser, and check whether it is intact
Three, the cutting head to the appropriate focus
Four, check and adjust the nozzle in the center
Five, cutting head sensor calibration
Six, cutting gas inspection, input open auxiliary gas command, observe whether it can be good from the nozzle
Seven, in accordance with the preparation of cutting materials into the fixed table above.
Eight, the material trial cut, check the section, adjust the process parameters, until meet the production requirements
Nine, cut out of the first piece of work, stop cutting to see if it meets the requirements
Make cutting program according to the drawings required by the workpiece, and import it to CNC
Move the cutting head to the starting point and press "Start" to execute the cutting procedure (usually there will be an automatic reset)