hydraulic guillotine shear

I. QC12Y - 6 x 6000 plate shears Technology and process 1. This machine is a new generation of hydraulic plate shears. Adopt advanced hydraulic integrated valve block. Compact structure, reduce pipeline connection, improve the reliability and easy maintainability of the system. 2, the series cylinder makes the machine tool in the shear, the cylinder synchronization, shearing Angle will not change. 3. The mounting surface of the blade on the tool rest is a spiral surface, which ensures the uniformity… Leer Más "QC12Y - 6 x 6000 plate shears Technology and process

What are the maintenance procedures of the plate shearing machine? Specifically speaking, mainly includes the following content, as: minor repair, repair, overhaul, test and acceptance, the following are starting from these four aspects, to introduce the plate shears maintenance procedures in detail, so that the reader will have reference in the future. A, minor repairs 1. Disassemble and inspect parts that are seriously worn. 2. Remove dirt, accumulate material, adjust clearance and relative position, replace or repair parts that can't… Leer Más "What are the maintenance procedures of the plate shearing machine?

Adjustment of clearance of sluice hydraulic guillotine shearing machine 1. Remove the blade and clean it piece by piece. 2. The blade can be used on all sides, select the good side and install it tightly.And check the horizontal and vertical blade flatness of the two directions. 3. Remove the upper blade and clean it piece by piece.Similarly, the blade can be used on all sides, choose the good side and install it tightly.And check the horizontal and vertical blade… Leer Más "How to adjust the gap of the gate hydraulic guillotine shearing machine?

Specifications for the use of  Hydraulic  Ironworker machine: 1. First of all, before opening, it is necessary to check whether the screws and pins of the punching and shearing machine, including the transmission parts, are well connected, whether there is a loose phenomenon, and check whether the ground wire is well grounded. 2. All parts should be lubricated before work. Do not feed first. After a few minutes of trial rotation, it feels no problem. 3. Do not overwork when… Leer Más "Specifications for the use of  Hydraulic  Ironworker machine

Safety and maintenance knowledge of hydraulic swing beam shearing machine 1. Be familiar with the structure, performance and operation instructions of the machine. 2. There is no need to adjust the hydraulic cutting of the machine under normal use. 3. Regularly check the sharpness of the cutting edge, and if the cutting edge is blunt, it should be replaced with another cutting edge or sharpened in time. The blade only needs to sharpen the thickness plane. 4. The net type… Leer Más "Safety and maintenance knowledge of hydraulic swing beam shearing machine

Preparation work before operation and control of hydraulic pendulum type plate shearing machine: 1, cleaning the oil on the surface of the machine parts, inspection ball valve should be in the open position. 2, each part of the lubrication oil injection. 3. Add 46 hydraulic oil into the oil tank. 4, the machine is grounded, connected to the power supply, check the coordination between the electrical actions. 5, the shear sheet material, in line with the material σ6=45Kg/mm2 σ6=20% if… Leer Más "Preparation work before operation and control of hydraulic pendulum type plate shearing machine

Sheet metal shearing machine operator post responsibility system  First, the staff should strictly abide by the safety technical operation procedures of the plate shearing machine. Two, the staff should be familiar with the general structure, principle and other knowledge of the plate shearing machine, can carry out general fault processing on the equipment. three. Timely maintenance of the equipment is required to ensure that the equipment is in good condition. Four, can identify shear material, reasonable use of equipment Five,… Leer Más "Sheet metal shearing machine operator post responsibility system