Sheet bending machine operation, on the contrary, and even the difference origin have, instead of copying the steel,
the bending point of size, have invalid bending interval is different, contrary to normal 3.2 thickness 200 mm in 10 tons of successively,
as a condition of stainless steel so have coupled to rebound with sample thickness and hardness to a little older,
concrete steps without a certain bargain. The long service life of the bending machine will increase the profits of the production-oriented enterprises.
Then how to protect the bending machine is particularly important. The common sense of the protection of the bending machine is introduced above.
First, the bending machine lasts should be cleaned and lubricated on schedule.
2. Review the coaxial of the high and low die seat of the bending machine on schedule. If the die position is not correct, it will lead to unilateral gnawing of the mold or cracking of the last.
3. Unsuitable material tree shall be selected for the unsuitable material tree; Suitable plate thickness suitable material should be selected under the mold gap.
4. The molding last shall fine tune the driving head from the lowest to the cutting position step by step; the remaining icing liquid must be added during the grinding; after the grinding, the edge shall be treated with oilstone to lose the extreme sharp alignment, and demagnetization and oiling shall be performed.
V. When replacing the die and blade die, pay attention to the insurance before and after starting the facility to prevent the facility, last and personal damage.
Six. The maladjusted cylinder speech and the machine bright and smooth piecemeal oil road, joint test review.
Test and review of insulation impedance of motor circuit and electrical operating circuit.
Eight, the machine accuracy (verticality, parallelism, comprehensive clearance, etc.) test, adjust and proofread when necessary.
Atmospheric debris aerodynamic components, lines, etc. Dirty protection & review.
Spanish 
English 
Russian 