(1) The shearing machine should be responsible for the use and storage. The operator must be familiar with the structure and performance of the QC12Y 6X3200 Hydraulic Shearing Machine .
(2) It is strictly forbidden to overload the plate shearing machine. Do not shear hardened steel and hard steel, high speed steel, alloy steel, castings and non-metallic materials.
(3) The cutting edge of the shearing machine blade should be kept sharp. If the cutting edge of the shearing machine is blunt or broken, it should be repaired or replaced in time.
(4) When many people operate the plate shearing machine, there should be special personnel to command and coordinate.
(5) It is forbidden to shear two kinds of materials with different thickness and specifications at the same time when shearing machine is cutting.
(6) When cutting plate feeding, it is forbidden to promote the operation under the pressing plate of the shearing machine. When cutting short material, another iron plate should be pressed, and when cutting material, fingers away from the knife edge at least 200 mm.
(7) after using the pry hold to the line, the pry hold should be immediately out of the pry hold before cutting. If the iron plate moves, the wooden pillow should be used to stop the pry hold so as not to hurt people under the foot.
(8) Cut workpiece must be placed smoothly, do not pile up too high, do not pile up in the corridor. Corners and waste materials should be cleaned up in time to keep the site tidy.
