Precautions for cleaning control cabinet of handheld laser cleaning machine 3000 watts

Precautions for cleaning control cabinet of  handheld laser cleaning machine 3000 watts

Control cabinet cleaning

1. Clean the dust on the circuit board in the electrical cabinet with compressed air;

2. Check whether CNC/Servo/Devicenet Settings are correct;

3. Check and adjust the Settings of each gas in Gascon handheld laser cleaning machine 3000 watts;

4. Check and adjust the analog voltage adjustment for each axis Servo;

5. Clean the air conditioner inlet and outlet filters with compressed air.

6. Check whether the temperature in the electrical cabinet is normal and whether the air conditioner works properly;

7. Check whether the door of the electric control cabinet is tightly closed.

Cleaning of dust collector

1. Check the hopper of the dust collector, if the dust amount exceeds 3/4, clean the hopper in time

2. Check whether the pressure difference between the inlet and outlet of the filter element is normal, and replace the filter element if necessary;

3. Check whether the pressure of compressed air at the inlet of the dust collector is normal and clean the oil filter;

4. Check whether the dust collector seal is in good condition and replace it if necessary;

5. Check whether the air duct is tight.

Cleaning of water cooler

1. Use compressed air to clean the dust on the surface of the heat sink, inside the water cooler, and on the surface of the fan every week.

2. Check whether water leaks inside the water cooler.

3. Check whether the water level of the water cooler meets the requirements. If necessary, add water (softened water must be used);

4. Clean the filter element on the waterway regularly.