1, before work to carefully check whether all parts of the metal shearing machine price is normal, electrical equipment is intact, lubrication system is smooth; Cleaning table and placed around tools, measuring tools and other sundries and corner waste.
2, do not operate the plate shearing machine alone, should be coordinated by 2-3 people to feed, control dimensional accuracy and take materials, and determine the unified command by 1 person.
3, according to the specified thickness of the cutting plate, adjust the scissors clearance of the cutting machine. It is not allowed to cut two different specifications and different materials at the same time. Stacking shear is not allowed. Shearing of the sheet requires smooth surface, not allowed to shear can not press the narrow sheet.
4, shear belt, flywheel, gear and shaft and other moving parts must be installed protective cover.
5. The feeding fingers of the shears operator should keep a distance of less than 200mm from the scissor mouth, and leave the pressing device. The protective fence placed on the trigger should not block the operator's eyes from the cutting area. The waste generated after operation has edges and corners. The operator should clean it in time to prevent being stabbed and cut.
6, the shear flywheel, gear, shaft, tape and other moving parts should be equipped with a protective cover.
7. Place a fence to prevent the operator's hand from entering the scissors falling area. It is strictly forbidden to pick up waste on the ground when working, so as not to be injured by falling workpiece.
8. Do not cut quenched material, and never allow cutting to exceed the working capacity of the shears.
