After understanding the principle of the máquina de corte por láser, for the subsequent operation will be much simpler,
the operator only need to pay attention to the following points:
01. Clear the raw materials must be produced and processed, the sheet metal parts raw materials are fixed flat to the bedside of the processing equipment,
and then clear the stability of the placement of raw materials, in order to prevent vibration in the laser cutting process,
resulting in laser cutting accuracy is not up to the provisions.
02. Actual operation control panel, input the commodity laser cutting pattern design, and the laser cutting raw material thickness and other main parameters,
then adjust the laser cutting head to the appropriate origin position, and then self-reflection and adjust the nozzle vertical center.
03. Run the regulated power supply and its industrial chiller, and set the temperature and pressure of the industrial chiller.
04. Run the laser generator, then turn on the CNC lathe. Although the above four points are simple and clear,
it takes a lot of time to train and understand each key point of practical operation.
Laser cutting machine operation process is not difficult, in the next few days of professional technical personnel training can master,
but in order to reduce the use of laser cutting machine in the future, increase the cutting effect, or need to understand more professional knowledge to avoid problems.