CNC S 625-Compact and ergonomic CNC for guillotines shearing machines

Compact and ergonomic CNC for guillotine shearing machines, equipped with a 7” touch screen that simplifies all operations on a shearing machine, making them intuitive. It can manage up to 3 axes and 16+12 I/O with an integrated PLC, and can store thousands of part programs. All kinds of shearing technology are supported.

General Specifications:

• 24Vdc, 60W max power supply
• 7” Color LCD TFT display with an anti-glare screen
• 4-wire resistive touch screen
• Silicon hard disk (flash disk), USB port

Technology:

• VIA Eden X1 – 1.06GHz – 1Gbytes DDR3 RAM
• FPGA integrated logics, surface mounting, fiber optic

Communication Ports:

• 1 Serial port RS-232
• 1 USB 2.0 port for memory stick
• 1 Ethernet port 10/100Mbit

User Memory:

• Silicon hard disk (flash disk) 128 MBytes

Axes:

• Standard 3 axes
• 3 x 14Bit +/-10V analog outputs
• 3 x Incremental encoder inputs, 5V differential line driver or 5V/12V single ended. Maximum encoder input frequency 500KHz. (Note: One of these axes can be managed by analog input instead digital encoder)

Inputs/Outputs:

• 16 digital inputs - 24Vdc PNP opto isolated
• 12 digital outputs - 24Vdc 600mA opto-isolated static outputs protected against short circuit
• 3 Analogical inputs (0-10 V, 12 bits resolution)
• 1 Analogical output (0-10V, 12 bits resolution)

Machine Configurations:

• All kinds of guillotine shearing machines, equipped with 1 to 3 axes (back gauge, blade gap, angle). Different configurations are available on demand.

Main Functions:

• All programs, tools description, and parameters can be stored internally or on a USB memory stick, and exchanged with other CNC and PC via USB memory stick.
• Complete graphic off-line programming on a standard PC, through a simulation program.
• IEC 61131-3 PLC programming language with function utilities written in IL or “C” language are available for manufacturers.
• Customizable alarm messages.
• Very Easy Programming with 2D graphic tools and PC software offline.

Special Features:

• Selectable and programmable axes and auxiliary functions.
• Drivers for hydraulic axes with proportional valves or servo valves or open loop valves, servo drivers (a.c./d.c.), and a.c. motors with or without inverters.
• Modem for telecommunication assistance.
• USB memory stick available on all product ranges.
• Fully hardware and software compatibility among all product ranges.
• CNC hardware configuration (motor type & quantity, valve type & quantity, I/O type & quantity) can be edited from the CNC itself.