Each BS3015T-3000W Laser cutting machine will have the corresponding operation steps, corresponding to different brands, although some roughly the same, but in the relevant detailed problems and differences, Shenzhen Qunying laser cutting operation knowledge is as follows:
One, according to the material and thickness, call the corresponding parameters
Two, detection cutting parameters select the corresponding lens and laser, and check whether it is intact
Three, the cutting head to the appropriate focus
Four, check and adjust the nozzle center
Five, cutting head sensor calibration
Six, cutting gas inspection, input the opening auxiliary gas command, observe whether it can be well ejected from the nozzle
Seven, in accordance with the preparation of cutting material into the fixed workbench.
Eight, the material trial cut, check the section, adjust the process parameters, until meet the production requirements
Nine, cutting the first piece of work, suspend cutting to see if it meets the requirements
Ten, according to the workpiece requirements of the drawing to prepare cutting procedures, and imported into the CNC
Move the cutting head to the starting point of cutting and press "Start" to execute the cutting procedure (there will be automatic reset under normal circumstances)
