Bending press brake machine maintenance is divided into several parts: external maintenance, electrical control, lubrication device, peripheral equipment and cutting tools.
1. Bending press brake machine the maintenance
(1) Wipe the surface and protective cover of the machine to ensure the cleanliness of the inside and outside.
(2) Clean the accessories and clean the surrounding environment of the machine tool.
(3) The surface of the machine tool and the paint on its dead corner should be able to see its natural color and smooth.
2. Electrical control
(1) Check whether the electrical box is intact and damaged.
(2) Whether the electrical components are damaged, whether they need to be repaired or replaced, and whether the wiring between components is in good condition.
(3) Whether the operation of the main motor is normal, safe and reliable, and whether there is any abnormality, fever or noise.
(4) whether the operation of CNC system is accurate, whether to meet the accuracy requirements;Whether the CNC device can be accurately input.
3. Lubrication device
(1) Whether the lubrication of each lubrication part is good and sufficient, and whether the amount of oil in the oil circuit and oil cup is sufficient.
(2) Whether the valve body is flexible and there is no blockage.
(3) Whether the filter device is clean, if there is blockage, it should be cleaned in time.
4. Peripheral devices
(1) Blank parts and various materials are placed reasonably, and safe and reliable.
(2) Whether the foot switch protection cover is properly installed and used.
5. The cutting tool
(1) Whether the movement of the upper and lower tools is normal, whether there is deviation, and whether the action is flexible and reliable.
(2) the parallelism of the slider and the workbench is good, and the position of the direct control balance valve is accurate.
Spanish 
English 
Russian 