Cutting precision is an important factor to judge the quality of CNC laser cutting machine.
The following small series for you to introduce the four factors that affect the cutting accuracy of durmapress laser cutting machine:
1, laser generator laser condensation size. After gathering if the light spot is very small, the cutting accuracy is very high,
if the gap after cutting is very small. The precision of laser cutting machine is very high, the quality is very high.
But the laser beam is tapered, so the cut gap is also tapered. Under such conditions CNC laser cutting machine.
the greater the thickness of the workpiece, the lower the accuracy will be, so the greater the slit.
2, the accuracy of the workbench. If the precision of the table is very high, the precision of the cutting is also improved.
So the accuracy of the table is also a very important factor to measure the accuracy of the laser generator.
The laser beam condenses into a cone. When cutting, the laser beam is conical down, then if the thickness of the cutting workpiece is very large, the precision of cutting will be reduced, and the gap will be very large.
4, cutting materials are different, will also affect the accuracy of laser cutting machine.
In the same case, the precision of cutting stainless steel and aluminum will be very different,
the precision of stainless steel cutting will be higher, and the section will be smooth.
In summary, the four major factors affecting the cutting accuracy of durmapress laser cutting machine xiaobian is finished. If you need to know more, please pay attention to our official website.
