8x2500 hydraulic plate shearing machine maintenance method:
- Operate in strict accordance with the operating procedures.
2, each time before starting, according to the requirements of lubrication chart, timed, fixed point, quantitative lubricating oil, oil should be clean without precipitation.
3, the machine must always keep clean, not paint part of the anti-rust oil.
4, the lubrication oil in the motor bearing should be replaced and filled regularly, and often check whether the electrical part works normally, safely and reliably.
5, regularly check the triangle belt, handle, knob, button is damaged, serious wear should be replaced in time, and reported to spare parts supplement.
6, regular inspection and repair switches, insurance, handle, to ensure their reliable work.
- 10 minutes before work every day, lubricate and scrub the machine tools.
- Non-designated personnel are strictly prohibited to operate the equipment. Usually, people must stop after leaving the machine.
8x2500 hydraulic plate shears _8mm thick 2.5m hydraulic pendulum plate shears performance characteristics:
1, rectangular lower blade, can use four cutting edge, prolong the service life of the blade.
2, the working surface is equipped with an auxiliary knife block, easy to adjust the blade.
3, QC12Y hydraulic digital display pendulum plate shearing machine, hydraulic pendulum plate shearing machine, using steel plate welding machine table with feeding ball, easy to operate.
4, the blade clearance adjustment adopts the non-polar adjustment mechanism, to adapt to the shear needs of different plate thickness and material.
5, adjust the shear stroke, not only can improve the processing efficiency, but also can realize sectional shear function.
6, cut the number of automatic counting, reduce the tedious counting work.