1, the frame adopts steel structure, left and right vertical plate, table and pressing plate welded into a whole structure,
after welding by tempering to eliminate the internal stress, so the overall rigidity is good, high stability 8 x2500 hydraulic shearing machine.
2. The knife rest of the plate cutter adopts steel structure parts. Under the thrust of the oil cylinders on both sides,
it can swing around the fixed pin shaft to complete the shearing action,
without the need for a guide rail system. At the end of shearing 8 x2500 hydraulic shearing machine,
under the action of the return cylinder, the tool rest will return quickly and automatically.
With quick adjustment of blade clearance mechanism, the scale value is displayed on the dial.
3. The rear stopper is installed on the tool rest and moves with the tool rest.
The adjustment of the stopper distance is driven by the motor, through a drive shaft and a pair of sprocket pair transmission,
respectively transferred to the left and right screw, driving the stopper frame along the guide rod for forward and backward movement,
there are two buttons on the button panel of the button box in front of the QC12Y6×5000 hydraulic shearing machine,
respectively for the forward and rear coarse adjustment button,
The rear stopper moves forward and backward quickly when the button is pressed.
There is a adjusting hand wheel on the button box to fine-tune and position the stroke.
There is a mechanical digital display on the button box to display the distance of the rear stopper.
