40T hydraulic bending machine, double cylinder bending machine, small bending machine simple introduction
With good rigidity and stability, the whole frame has good rigidity, stable work, safe and reliable, convenient operation, extraordinary quality.
40T hydraulic bending machine, double cylinder bending machine, small bending machine details
With good rigidity and stability, the whole frame has good rigidity, stable work, safe and reliable, convenient operation, extraordinary quality.
The frame adopts the whole steel welding structure and adopts The German technology to eliminate the internal stress.
To ensure the overall accuracy of the machine, with excellent stiffness, excellent anti-distortion, anti-tilt ability.
Hydraulic transmission to ensure that the work will not be caused by plate thickness change or improper selection of "V"
groove under the die caused serious overload accidents, in addition, the machine has a stable work,
convenient operation, low noise, safe and reliable characteristics.
2The oil cylinder is equipped with a mechanical block, to ensure the slider line to the bottom dead point
of repeated positioning accuracy, to ensure the consistency of bending Angle in mass production.
Wc67y-40t /2500 hydraulic sheet bending machine main structure and configuration
1, slide block part: hydraulic transmission, the slide block part is composed of slide block, oil cylinder and mechanical block fine tuning structure.
2, the working table part: controlled by the control button box, so that the motor drives the stopper frame to move back and forth,
3, synchronization system: the machine is composed of torsion shaft, swing arm, joint bearing and other mechanical synchronization mechanism, simple structure, stable and reliable performance, high synchronization accuracy.
4, stopper mechanism: stopper adopts motor drive, drives two screw rods to move synchronously through sprocket, counter shows the size of stopper, can be manually fine-tuned.
