200T deep throat press (throat depth 1250mm)-200T crank press maintenance requirements:
1. After the initial use of the lubrication system for two months, the oil tank, pipeline and filter should be cleaned and the oil should be changed once.
After that, the oil can be cleaned once every six months, and the oil should be changed and cleaned regularly according to the actual situation 200T deep throat press.
2, electrical system: wiring terminal screw, button switch, micro switch, AC contactor, frequency converter and so on should be checked once a month.
3, precision inspection: A, precision inspection is checked once A year, the inspection please according to the accuracy of the factory attached with the record of check check.
B. If the sliding surface is worn, the guide pillar should be repaired or replaced, and the accuracy should be corrected after the copper sleeve.
When checking the accuracy, the flatness of the table should be ensured.
4, every day after work, the operator should be 200 tons of deep throat punch (throat depth 1250mm)-200T crank press components of the use of inspection,
and carefully fill in the "punch preventive maintenance card", regular inspection should fill in the "punch periodic Test table".
5, 200 tons of deep throat punch maintenance, maintenance of electrical system, accuracy check should be carried
out by professional and technical personnel, such as no professional and technical personnel, please contact the manufacturer.
