1, first ensure that the beam from the laser tube into the center of the 1# mirror 2000w fiber laser machine for metal cutting.
2. Paste double-sided adhesive paper in front of the 2# mirror, move the beam to the position closest to the laser tube, and make a mark according to the point shooting (control the appropriate light intensity) 2000w fiber laser machine for metal cutting.
3, gradually move the beam to the furthest position from the laser tube, according to the point shooting, hit a mark.
4. If the two marks do not coincide, adjust mirror 1# to make the two marks coincide at the center.
5. Repeat the second to fourth steps until the two marking centers completely coincide.
6, in front of the 3# mirror affixed with double-sided adhesive paper, the car (laser head) to the position closest to the 2# mirror, according to the point shooting (control the appropriate light intensity), hit a mark.
7, gradually move the laser head (car) to the farthest position from the 2# mirror, according to the point shooting (it is best to use a piece of cardboard to measure the approximate position of the spot first, in order to prevent wounding), hit a mark.
8. If the two marks do not coincide, adjust the 2# mirror so that the two marks coincide at the center.
9. Repeat steps 6 to 8 until the two marking centers overlap completely.
10, in front of the 3# mirror into the light hole, paste double-sided adhesive, point shooting, marked. If in the center, qualified.
11, if the laser does not fall in the center of the light hole, in the figure of the falling point on and off
I
