1000w fiber laser cutting machine Photoelectric couplers have three characteristics:
signal transmission takes the form of electric-optic-electric, the luminous part and the light part do not contact,
can avoid the output end to the input end may produce feedback and interference;
2. Strong ability to suppress noise interference;
3, has the advantages of durability, high reliability and fast speed,
the response time is generally within the number of high-speed optoelectronic couplers,
some of the response time is even less than 10ns.
Therefore, when designing the circuit of CNC laser cutting machine system,
attention should be paid to the isolation of the input signal circuit and the MCU connection.
Here, photoelectric coupling is the most commonly used method.
Wuxi Qingyuan Laser Technology Co., Ltd. is a professional research and development,
production of industrial laser cutting machine modern manufacturing enterprises,
is the first batch of Wuxi New District Photoelectric Science and Technology Industrial Park to introduce high-tech enterprises,
the company has 10,000 square meters of standardized workshop.
When working in the same plate some places cut continuously some places cut off?
This kind of problem is generally caused by light bias or uneven work surface, you need to adjust the light,
adjust the platform surface. Sometimes the partial light is caused by the deformation of the guide rail, when the need to adjust the guide rail.
When you cut, the ends sometimes cut into each other, sometimes cut apart. Right?
The problem is generally the synchronization wheel fixing screw loose or the motor line has a problem.
If the motor line has a problem, Rayco laser cutting machine is sold, and the most one good group is all replaced, do not separately change one or two.